Truck Crane Chelyabinets v1.0
Demonstration of the possibilities of SpintiresMod.exe, about which you, probably, did not know)))
The crane plant works without calling in functions, it is possible to combine operations and even on the move))).
Paws work through functions. Suitable as a lifesaver of technology, for example, drowned.
For correct operation, the installed SpintiresMod.exe is required. You will need to add the controller to SpintiresMod.exe. The video instruction is attached (the zero controller for some reason does not work): https://youtu.be/S5AhyjUe170
You can set the control at will to any buttons, generally I would advise you to make 6 controllers at once – it will come in handy. In order for everything to work included “Enable managed restrictions” (screen). The default control is on the chimp.
Mod has: 1 addon (1000 repairs)
Chassis Ural-5453-4320-50m. Authors: Darius, Muzden (rus). Completion (for adequate operation of the crane): Shashok75
Crane “Chelyabinets”. Author: Max Dmitriev (MaximDm67). Finishing and envelope: Shashok75
Hey.
Awsome crane. Like it alot.
Can I lower and raise the hook on the wire block. so it’s easier to use the winch point.
Then, instead of 6 controls, there will be 8 controls.
Example:
1: Turn the tap, 4 = left / 6 = right
2: Raise / lower the crane lever, 2 = down / 8 = up
3: extend the crane bracket, 7 = in / 9 = out
4: Wire block with hook / winch position, 1 = down / 3 = up
Google Translate
Могу ли я опустить и поднять крючок на проволочном блоке. поэтому легче использовать точку лебедки.
Затем вместо 6 элементов управления будет 8 элементов управления.
Пример:
1: Поверните кран, 4 = влево / 6 = вправо
2: Поднимите / опустите рычаг крана, 2 = вниз / 8 = вверх
3: удлините кронштейн крана, 7 = в / 9 = вне
4: Проволочный блок с позицией крючка / лебедки, 1 = вниз / 3 = вверх